You can! The mission is studying magnetic reconnection, which happens in the atmosphere of stars, planets with magnetic fields and exotic objects across the universe such as black holes and neutron stars. MMS will unlock the answers on a small-scale using Earth as a laboratory. Scientists will share these discoveries with us, and then we too, will understand the process that happens on small and big scales, happening from close to home to the farthest reaches of the universe.
You may remember simple science experiments in school with bar magnets, pushing or pulling away them away from each other. Objects in space have magnetic fields and these are constantly moving and interacting with each other in a similar way. Since objects in space are more complicated than a bar magnet, things get interesting. Have you ever stretched out a rubber band so tight that it breaks? You are putting energy into the rubber band by stretching it. The rubber band gets to the point where it’s unstable. When it snaps, that energy is released. This is similar to how energy is stored and then released in magnetic fields around objects in space. Magnetic fields are not stationary, they move around and they can get stretched and twisted like the rubber band when they interact with other magnetic fields. When you think of the magnetic fields that MMS is studying, imagine it like the rubber band. Unlike on the surface of the earth (or in your old science class), these magnetic fields are in plasma, the 4th state of matter (solid, liquid and gas being the other three.) Plasma contains charged particles, which interact with magnetic fields. So here’s the exciting part…when the magnetic fields lines realign after breaking, they explosively accelerate particles in the plasma to nearly the speed of light! This process of energy release from magnetic fields is called magnetic reconnection.
Most of the universe that we see is made of plasma, but plasma is very rare on Earth (except in laboratories, TVs or an “Eat At Joe’s” neon sign). Interacting bar magnets on Earth will show the magnetic fields, but air doesn’t have charged particles to accelerate. So we must go outside the Earth’s surface to easily study magnetic reconnection. Studying and understanding this fundamental process is the main purpose of MMS. This process creates interesting phenomena both near and far on objects with magnetic fields. It causes eruptions on the sun, it releases energy from matter disks around black holes and neutron stars into space, it even happens at the boundaries of the giant bubble surrounding the solar system, letting in charged particles from the rest of the galaxy. Gaining an understanding of magnetic reconnections will explain a lot of what’s happening out there.
The MMS mission uses four identical spacecraft to provide the first ever three-dimensional view of gigantic explosions in space that release energy and fast-moving particles, the process called magnetic reconnection.
Magnetic reconnection catalyzes aurora at Earth and solar flares and CMEs on the sun.
Magnetic reconnection is also one of the most important drivers of space weather events, which can affect: • communications networks • GPS navigation • electrical power grids • satellite computers in space • astronaut health Magnetic reconnection is fundamentally the source of all space weather near Earth. It initiates solar flares and coronal mass ejections on the sun and is the process that allows energy from those explosions to cross the boundaries of the protective bubble around Earth – the magnetosphere — into near Earth space. Space weather can disrupt electronics on board spacecraft, affect GPS signals and lead to communications blackouts on Earth. Understanding space weather and what initiates it will also be crucial for protecting the health of astronauts journeying to Mars.
MMS will travel through two known areas of reconnection near Earth: on the dayside where magnetic fields from the sun connect to Earth’s fields and on the night side where Earth’s own fields can reconnect with each other. http://youtu.be/Wd2d3pNS7nM
There are four spacecraft in order to get three-dimensional science information. Four spacecraft also give MMS the necessary observational perspectives to determine whether reconnection events occur in an isolated locale, everywhere within a larger region at once, or traveling across space. Each spacecraft can be thought of as the point of a triangular pyramid, or tetrahedron. As the tetrahedron flies through space, it can measure the three-dimensional properties of magnetic reconnection regions. The separation distances will vary depending on the orbit and can be changed as the mission progresses. The inter-spacecraft distance can be made to be as large as 250 miles (400 km) to as small as 6 miles (10 km).
The four MMS spacecraft were built simultaneously at NASA’s Goddard Space Flight Center over the course of five years – a feat that required extraordinary coordination. Over 1000 people have worked on it. The MMS spacecraft will fly through reconnection regions in well under a second, so key sensors were built to take measurements 100 times faster than any previous mission. [Not a valid template]
The instruments measure energies of charged particles, the movement of plasma, and electric and magnetic fields. Each MMS observatory carries 11 scientific experiments, made up of 25 separate sensors. The instruments will measure energies of charged particles, the movement of plasma, and electric and magnetic fields, with unprecedentedly high – on the order of milliseconds — time resolution and accuracy. An early engineering feat was simply determining how to place all 25 sensors so they wouldn’t interfere with each other or block each other’s view.
The numerous MMS instruments are divided into three investigations or groups:
In addition, an Instrument Control group contains the spacecraft instrument electronics. Details can be found at http://www.nasa.gov/mission_pages/mms/spacecraft/instruments.html.
Imagine flying by the Grand Canyon in 0.03 seconds – less time than it takes to blink an eye – and having to record what you see. That’s what MMS must do. It flies through reconnection regions just a mile across at speeds of 30-60 miles a second. Many of the instruments aboard MMS have unprecedentedly high – on the order of milliseconds — time resolution and accuracy.
• Launch scheduled for March 12, 2015 • Cape Canaveral Air Force Station, Florida • Launch vehicle: ATLAS V 421
The spacecraft orbits will be controlled with an onboard propulsion system that uses 12 thrusters to adjust the orbit of each spacecraft. The spacecraft are tracked and commanded from a control center at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. One way that NASA will track the MMS fleet is through highly accurate and sensitive GPS receivers. They must be incredibly sensitive because the MMS orbit places it above the GPS constellation at times, so the MMS GPS receiver must lock onto GPS signals that arrive from the other side of Earth.
STAY TUNED: More to come after MMS launch on March 12, 2015